| Peer-Reviewed

An Investigation on Effects of Sisal Fiber Reinforced Concrete on Concrete Properties

Received: 9 May 2022     Accepted: 2 June 2022     Published: 16 June 2022
Views:       Downloads:
Abstract

One of the additional materials for sustainability and strength of concrete is Fiber Reinforced Concrete. Hence, the researcher is attempting to use sisal fiber as an effective and sustainable additive to produce good quality fiber reinforced concrete. This study aimed to examine the effects sisal fiber on the compressive and flexural strength of concrete. As well as it recommends the optimum percentage of sisal fiber percentage. Sisal fibers were brushed, lined up, and cut to obtain a 5cm length of the fiber. To produce a well-mixed fresh concrete, the fiber was added after mixing all concrete ingredients. The compressive strength was tested at the ages of 7, 14, and 28 days of curing. Flexural strength was tested at ages 7 and 28 days curing. A total 45 of 150 x 150 x 150mm concrete test cubes and 30 of 50mm x 100mm x 100mm beams were cast using a mix proportion of 1:1.93:3, with water-cement ratio of 0.5. The results showed that the compressive and flexural strength increased as the sisal fiber percentage increased up to 1.5%. The optimum values of compressive and flexural strength come from concrete containing 1.5% sisal fiber. Based on the test results, the compressive strength at 0.5%, 1.0%, and 1.5% gained 4.53%, 16.56%, and 29.69% of the average compressive strength respectively. At 2% addition of fiber, concrete lost 35.31% of strength at 28 days curing. The flexural strength at 0.5%, 1.0%, and 1.5% sisal fiber gained 9.23%, 12.1% and 9% of strength respectively, while at 2% the addition of sisal fibber lost 15% of strength at 28 days curing. Therefore, the addition of sisal plant fiber increased both compressive and flexural strength up to 1.5% fiber by weight of cement compared to the control group of concrete 1.5% of sisal fiber is recommended.

Published in Journal of Civil, Construction and Environmental Engineering (Volume 7, Issue 3)
DOI 10.11648/j.jccee.20220703.11
Page(s) 23-29
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Compressive Strength, Flexural Strength, Proportion, Sisal Fiber

References
[1] Balasubramanian, J. S. (2015). Experimental Investigation of Natural Fiber Reinforced Concrete in Construction industry. international research jpournal engineering and technology, 2 (1), 23 -72.
[2] Dhanasekar, R. M. (2017). Strength And Durability Evaluation of Sisal Fibre Reinforced Concrete. International Journal of Civil Engineering and Technology, 8 (9), 41-48.
[3] Sabarinathan. (2017). A Study on Mechanical Properties of Sisal Fiber reinforced. SSRG intrenational journal of civil engineering, 48-52.
[4] Araya Abera Betelie, Y. T. (2018). Experimental investigation of fracture toughness for treated sisal epoxy composite. School of Mechanical and Industrial Engineering, Addis Ababa University, AAiT King George VI, 5 (1), 93–104.
[5] Gopi, (2017). An Interpretation on the Properties of Sisal Fiber ReinforcedConcrete with Distinct Proportions of Fiber Addition. international journal and magazine of engineering technology, managment research, 4 (3), 234-45.
[6] Dinku, A. (2002). Construction Materials labratory manual. addis ababa: Addis Ababa University Institute of Technology.
[7] ASTMC-192/C192M. (2007). Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory C 192/C 192M. USA: ASTMC-192/C192M.
[8] ACI 211.1-81, A. (2002). Standard Practice for Selecting Proportions for concrete ACI 211.1-81. USA: ACI.
[9] ASTMC-78. (2004). strandard test for flexural srtength of concrete (Using Simple Beam with middle thrid span of length). USA: american society test matrials.
[10] ASTMC33/C33M. (2011). Standard Specification for Concrete Aggregates ASTM. USA: ASTMC-33.
[11] Hemant, S. S. (2017). Experimental Investigation of Mechanical Properties of Hybrid Sisal-Glass Fibre Reinforced. International Journal for Research in Applied Science & Engineering Technology (IJRASET), 5 (3), 23-53.
[12] Tara Sen, H. N. (2011). Application of Sisal, Bamboo, Coir and Jute Natural Composites in Structural Upgradation. International Journal of Innovation, Management and Technology, 2 (3), 186-190.
[13] Uddin, M. M. (2015). Effect of Banana Fibers on the Compressive and Flexural Effect of Banana Fibers on the Compressive and Flexural. Department of Civil, Construction and Environmental Engineering, University of Alabama at, 282-296.
[14] Tsegaye Y. 2017 Facture Toughness Investigation of Chopped Sisal Fiber Reinforced Epoxy Resin Composite, A thesis submitted to The School of Mechanical and Industrial Engineering, Addis Ababa University, Addis Ababa, Ethiopia.
Cite This Article
  • APA Style

    Meti Bezabih Mekonen, Garba Wokjira Fayisa. (2022). An Investigation on Effects of Sisal Fiber Reinforced Concrete on Concrete Properties. Journal of Civil, Construction and Environmental Engineering, 7(3), 23-29. https://doi.org/10.11648/j.jccee.20220703.11

    Copy | Download

    ACS Style

    Meti Bezabih Mekonen; Garba Wokjira Fayisa. An Investigation on Effects of Sisal Fiber Reinforced Concrete on Concrete Properties. J. Civ. Constr. Environ. Eng. 2022, 7(3), 23-29. doi: 10.11648/j.jccee.20220703.11

    Copy | Download

    AMA Style

    Meti Bezabih Mekonen, Garba Wokjira Fayisa. An Investigation on Effects of Sisal Fiber Reinforced Concrete on Concrete Properties. J Civ Constr Environ Eng. 2022;7(3):23-29. doi: 10.11648/j.jccee.20220703.11

    Copy | Download

  • @article{10.11648/j.jccee.20220703.11,
      author = {Meti Bezabih Mekonen and Garba Wokjira Fayisa},
      title = {An Investigation on Effects of Sisal Fiber Reinforced Concrete on Concrete Properties},
      journal = {Journal of Civil, Construction and Environmental Engineering},
      volume = {7},
      number = {3},
      pages = {23-29},
      doi = {10.11648/j.jccee.20220703.11},
      url = {https://doi.org/10.11648/j.jccee.20220703.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jccee.20220703.11},
      abstract = {One of the additional materials for sustainability and strength of concrete is Fiber Reinforced Concrete. Hence, the researcher is attempting to use sisal fiber as an effective and sustainable additive to produce good quality fiber reinforced concrete. This study aimed to examine the effects sisal fiber on the compressive and flexural strength of concrete. As well as it recommends the optimum percentage of sisal fiber percentage. Sisal fibers were brushed, lined up, and cut to obtain a 5cm length of the fiber. To produce a well-mixed fresh concrete, the fiber was added after mixing all concrete ingredients. The compressive strength was tested at the ages of 7, 14, and 28 days of curing. Flexural strength was tested at ages 7 and 28 days curing. A total 45 of 150 x 150 x 150mm concrete test cubes and 30 of 50mm x 100mm x 100mm beams were cast using a mix proportion of 1:1.93:3, with water-cement ratio of 0.5. The results showed that the compressive and flexural strength increased as the sisal fiber percentage increased up to 1.5%. The optimum values of compressive and flexural strength come from concrete containing 1.5% sisal fiber. Based on the test results, the compressive strength at 0.5%, 1.0%, and 1.5% gained 4.53%, 16.56%, and 29.69% of the average compressive strength respectively. At 2% addition of fiber, concrete lost 35.31% of strength at 28 days curing. The flexural strength at 0.5%, 1.0%, and 1.5% sisal fiber gained 9.23%, 12.1% and 9% of strength respectively, while at 2% the addition of sisal fibber lost 15% of strength at 28 days curing. Therefore, the addition of sisal plant fiber increased both compressive and flexural strength up to 1.5% fiber by weight of cement compared to the control group of concrete 1.5% of sisal fiber is recommended.},
     year = {2022}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - An Investigation on Effects of Sisal Fiber Reinforced Concrete on Concrete Properties
    AU  - Meti Bezabih Mekonen
    AU  - Garba Wokjira Fayisa
    Y1  - 2022/06/16
    PY  - 2022
    N1  - https://doi.org/10.11648/j.jccee.20220703.11
    DO  - 10.11648/j.jccee.20220703.11
    T2  - Journal of Civil, Construction and Environmental Engineering
    JF  - Journal of Civil, Construction and Environmental Engineering
    JO  - Journal of Civil, Construction and Environmental Engineering
    SP  - 23
    EP  - 29
    PB  - Science Publishing Group
    SN  - 2637-3890
    UR  - https://doi.org/10.11648/j.jccee.20220703.11
    AB  - One of the additional materials for sustainability and strength of concrete is Fiber Reinforced Concrete. Hence, the researcher is attempting to use sisal fiber as an effective and sustainable additive to produce good quality fiber reinforced concrete. This study aimed to examine the effects sisal fiber on the compressive and flexural strength of concrete. As well as it recommends the optimum percentage of sisal fiber percentage. Sisal fibers were brushed, lined up, and cut to obtain a 5cm length of the fiber. To produce a well-mixed fresh concrete, the fiber was added after mixing all concrete ingredients. The compressive strength was tested at the ages of 7, 14, and 28 days of curing. Flexural strength was tested at ages 7 and 28 days curing. A total 45 of 150 x 150 x 150mm concrete test cubes and 30 of 50mm x 100mm x 100mm beams were cast using a mix proportion of 1:1.93:3, with water-cement ratio of 0.5. The results showed that the compressive and flexural strength increased as the sisal fiber percentage increased up to 1.5%. The optimum values of compressive and flexural strength come from concrete containing 1.5% sisal fiber. Based on the test results, the compressive strength at 0.5%, 1.0%, and 1.5% gained 4.53%, 16.56%, and 29.69% of the average compressive strength respectively. At 2% addition of fiber, concrete lost 35.31% of strength at 28 days curing. The flexural strength at 0.5%, 1.0%, and 1.5% sisal fiber gained 9.23%, 12.1% and 9% of strength respectively, while at 2% the addition of sisal fibber lost 15% of strength at 28 days curing. Therefore, the addition of sisal plant fiber increased both compressive and flexural strength up to 1.5% fiber by weight of cement compared to the control group of concrete 1.5% of sisal fiber is recommended.
    VL  - 7
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Construction Technology and Managemen Department, College of Engineering and Technology, Mizan-Tepi University, Tepi, Ethiopia

  • Department of Construction Technology and Management, Engineering and Technology College, Mizan-Tepi University, Tepi, Ethiopia

  • Sections