| Peer-Reviewed

Analytical Study on Seismic Response Reduction for PC Bridge: Effects of Cost on a Proposed Seismic Reinforcement Method Due to Collision

Received: 2 June 2020     Accepted: 22 June 2020     Published: 7 July 2020
Views:       Downloads:
Abstract

After the 1995 Kobe strong earthquake, it has been greatly revised in Japanese highway bridge codes. It was secured a large gap size of the girder for the collision of girders by the Level 2 Earthquake Ground Motion of the seismic design. However, if a large gap size of the girder is adopted, the expansion joint have to be largely changed. Furthermore, the construction costs and the seismic reinforcement costs will be increased. It was considered that the gap reduction allowing the collision of girders, as a premise of preventing the collapse of the bridge, was one of the seismic reinforcement method in order to decease the construction costs and the seismic reinforcement costs. In addition, it is necessary that damage of the girder end and the pier bottom is decreased by attaching rubber shock absorber to the end of girder. In order to reduce gap size between girders, it is necessary that the resistance characteristics of the abutment due to the collision of girders and the dynamic response characteristics due to the damping at the bottom of pier are grasped. Although many studies on the collision phenomenon of bridge girders have been published, the effects of cost on seismic reinforcement allowing the collision of PC bridge girders have not been sufficiently considered yet. In this study, the resistance characteristics of the abutment due to the collision of girders and the dynamic response characteristics due to the damping at the bottom of pier will be verified by carrying out dynamic response analysis that the 3-dimensional finite element model (3D-FEM) of the PC bridge was built. In addition, the effects of cost on the proposed seismic reinforcement allowing the collision of concrete bridge girders will be considered. From the comparison of the total cost on both the current method and the proposed one, it will be confirmed that the proposed seismic reinforcement method is very effective.

Published in Journal of Civil, Construction and Environmental Engineering (Volume 5, Issue 3)
DOI 10.11648/j.jccee.20200503.12
Page(s) 42-51
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2020. Published by Science Publishing Group

Keywords

Seismic Response Reduction, Isolation Rubber, Collision, Wing Wall, Seismic Reinforcement Method

References
[1] Japan Road Association. “Specification for Highway Bridges”, Part V Seismic Design, Tokyo, Japan, November, 2017. (in Japanese).
[2] Tomohisa Hamamoto, Kenji Kosa, Hironori Abe, Yasuo Inokuma and Yoshifumi Nariyuki. “A study on damage mechanism of a bridge that suffered disaster with the Niigata-ken Chuetsu earthquake”, Journal of Structural Engineering, JSCE, Vol. 52A, pp. 349-356, March, 2006. (in Japanese).
[3] Desy Setyowulan, Tomohisa Hamamoto and Toshitaka Yamao. “Elasto-Plastic Behavior of 3-Dimensional Reinforced Concrete Abutments Considering the Effect the Wing Wall”, International Journal of Civil Engineer and Technology, pp. 97-113, November, 2014.
[4] Desy Setyowulan, Keizo Yamamoto, Toshitaka Yamao and Tomohisa Hamamoto. “Dynamic Analysis of Concrete Girder Bridges Under Strong Earthquakes: the Effect of Collision, Base-Isolated Pier and Wing Wall”, International Journal of Civil Engineering and Technology, pp. 79-93, April, 2015.
[5] Desy Setyowulan, Toshitaka Yamao, Keizo Yamamoto and Tomohisa Hamamoto. “Investigation of seismic response on girder bridges – the effect of displacement restriction and wing wall types”, Procedia – Social and Behavioral Sciences 218, pp. 104-117, May, 2016.
[6] Lilya Susanti, Desy Setyowulan and Ming Narto Wijaya. “An Experimental Investigation on Behavior of RC Parapet Wall of Abutment under Collision”, International Journal of Civil Engineering and Technology, 9 (9), pp. 1831-1838, September, 2018.
[7] Dassault Systèmes Simulia Corp. “ABAQUS Analysis User's Manual”, Version 6.11, USA, January, 2011.
[8] Hisanori Otsuka, Shigeyuki Kuriki, Jeung-Geun Park, Yasuyuki Suzuki and Takayuki Tsuchida. “Study on the seismic isolation of high-elevated rigid-frame steel bridge with double deck”, Journal of Structural Engineering, JSCE, Vol. 45A, pp. 869-878, March, 1999. (in Japanese).
[9] Tsutomu Usami, Shogo Kiyokawa and Akira Kasai. “Analysis model of seismic isolation bearing in consideration of P - Δ effect”, Proceedings of the 3rd Symposium on Seismic Design of Bridges based on Design Ultimate Horizontal Strength during an Earthquake, JSCE, pp. 143-150, December, 1999. (in Japanese).
[10] Junichi Hoshikuma, Shigeki Unjoh and Kazuhiro Nagaya. “Spacing effect on inelastic behavior of reinforced concrete columns subjected to cyclic loading”, Journal of Structural mechanics and earthquake engineering, JSCE, No. 669 / V-50, pp. 215-232, February, 2001. (in Japanese).
Cite This Article
  • APA Style

    Tomohisa Hamamoto, Toshitaka Yamao, Desy Setyowulan. (2020). Analytical Study on Seismic Response Reduction for PC Bridge: Effects of Cost on a Proposed Seismic Reinforcement Method Due to Collision. Journal of Civil, Construction and Environmental Engineering, 5(3), 42-51. https://doi.org/10.11648/j.jccee.20200503.12

    Copy | Download

    ACS Style

    Tomohisa Hamamoto; Toshitaka Yamao; Desy Setyowulan. Analytical Study on Seismic Response Reduction for PC Bridge: Effects of Cost on a Proposed Seismic Reinforcement Method Due to Collision. J. Civ. Constr. Environ. Eng. 2020, 5(3), 42-51. doi: 10.11648/j.jccee.20200503.12

    Copy | Download

    AMA Style

    Tomohisa Hamamoto, Toshitaka Yamao, Desy Setyowulan. Analytical Study on Seismic Response Reduction for PC Bridge: Effects of Cost on a Proposed Seismic Reinforcement Method Due to Collision. J Civ Constr Environ Eng. 2020;5(3):42-51. doi: 10.11648/j.jccee.20200503.12

    Copy | Download

  • @article{10.11648/j.jccee.20200503.12,
      author = {Tomohisa Hamamoto and Toshitaka Yamao and Desy Setyowulan},
      title = {Analytical Study on Seismic Response Reduction for PC Bridge: Effects of Cost on a Proposed Seismic Reinforcement Method Due to Collision},
      journal = {Journal of Civil, Construction and Environmental Engineering},
      volume = {5},
      number = {3},
      pages = {42-51},
      doi = {10.11648/j.jccee.20200503.12},
      url = {https://doi.org/10.11648/j.jccee.20200503.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jccee.20200503.12},
      abstract = {After the 1995 Kobe strong earthquake, it has been greatly revised in Japanese highway bridge codes. It was secured a large gap size of the girder for the collision of girders by the Level 2 Earthquake Ground Motion of the seismic design. However, if a large gap size of the girder is adopted, the expansion joint have to be largely changed. Furthermore, the construction costs and the seismic reinforcement costs will be increased. It was considered that the gap reduction allowing the collision of girders, as a premise of preventing the collapse of the bridge, was one of the seismic reinforcement method in order to decease the construction costs and the seismic reinforcement costs. In addition, it is necessary that damage of the girder end and the pier bottom is decreased by attaching rubber shock absorber to the end of girder. In order to reduce gap size between girders, it is necessary that the resistance characteristics of the abutment due to the collision of girders and the dynamic response characteristics due to the damping at the bottom of pier are grasped. Although many studies on the collision phenomenon of bridge girders have been published, the effects of cost on seismic reinforcement allowing the collision of PC bridge girders have not been sufficiently considered yet. In this study, the resistance characteristics of the abutment due to the collision of girders and the dynamic response characteristics due to the damping at the bottom of pier will be verified by carrying out dynamic response analysis that the 3-dimensional finite element model (3D-FEM) of the PC bridge was built. In addition, the effects of cost on the proposed seismic reinforcement allowing the collision of concrete bridge girders will be considered. From the comparison of the total cost on both the current method and the proposed one, it will be confirmed that the proposed seismic reinforcement method is very effective.},
     year = {2020}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Analytical Study on Seismic Response Reduction for PC Bridge: Effects of Cost on a Proposed Seismic Reinforcement Method Due to Collision
    AU  - Tomohisa Hamamoto
    AU  - Toshitaka Yamao
    AU  - Desy Setyowulan
    Y1  - 2020/07/07
    PY  - 2020
    N1  - https://doi.org/10.11648/j.jccee.20200503.12
    DO  - 10.11648/j.jccee.20200503.12
    T2  - Journal of Civil, Construction and Environmental Engineering
    JF  - Journal of Civil, Construction and Environmental Engineering
    JO  - Journal of Civil, Construction and Environmental Engineering
    SP  - 42
    EP  - 51
    PB  - Science Publishing Group
    SN  - 2637-3890
    UR  - https://doi.org/10.11648/j.jccee.20200503.12
    AB  - After the 1995 Kobe strong earthquake, it has been greatly revised in Japanese highway bridge codes. It was secured a large gap size of the girder for the collision of girders by the Level 2 Earthquake Ground Motion of the seismic design. However, if a large gap size of the girder is adopted, the expansion joint have to be largely changed. Furthermore, the construction costs and the seismic reinforcement costs will be increased. It was considered that the gap reduction allowing the collision of girders, as a premise of preventing the collapse of the bridge, was one of the seismic reinforcement method in order to decease the construction costs and the seismic reinforcement costs. In addition, it is necessary that damage of the girder end and the pier bottom is decreased by attaching rubber shock absorber to the end of girder. In order to reduce gap size between girders, it is necessary that the resistance characteristics of the abutment due to the collision of girders and the dynamic response characteristics due to the damping at the bottom of pier are grasped. Although many studies on the collision phenomenon of bridge girders have been published, the effects of cost on seismic reinforcement allowing the collision of PC bridge girders have not been sufficiently considered yet. In this study, the resistance characteristics of the abutment due to the collision of girders and the dynamic response characteristics due to the damping at the bottom of pier will be verified by carrying out dynamic response analysis that the 3-dimensional finite element model (3D-FEM) of the PC bridge was built. In addition, the effects of cost on the proposed seismic reinforcement allowing the collision of concrete bridge girders will be considered. From the comparison of the total cost on both the current method and the proposed one, it will be confirmed that the proposed seismic reinforcement method is very effective.
    VL  - 5
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Department of Civil Engineering, Nishinippon Institute of Technology, Fukuoka, Japan

  • Center for Water Cycle, Marine Environment and Disaster Management, Kumamoto University, Kumamoto, Japan

  • Department of Civil Engineering, Universitas Brawijaya, East Java, Indonesia

  • Sections